HOW TO CONFIGURATION AND SETTING LINKSYS BEFSR41v4 (BEFSR41 version 4)

It's so simple and easy, guy! I'm too fool that think networking is difficult :)) programming more difficult in fact now....

1.The first step is you must plug the adaptor of Linksys to the electric source, then plug also behind of router RJ-45 port. Connect the other side of RJ-45 to PC/laptop.
















2.Configure your Network Connection, for this choice you must fill as default router IP. See the picture below for more information then fill to your setting.

3. After that, open your browser (firefox's better) and fill "//http:192.168.1.1"

4. Then, fill "admin" in user name and password also "admin".

5. After that, you must configuration Linksys, so just fill ip address, gateway, subnet mask, dns (from your ISP). Tehen fill what number of network id you wanna beginning on your client. And the all your client that you want. Activate the DHCP and click "Save"
6. So, connect internet cable on internet port of router Linksys, then configure DHCP on client PC after connect your PC with router. Then to check it's success or not...open command form>ipconfig....
then see ip address, and ping "google.com"(for example)

So, try guy..... and share everything with me